Skip to Main Content
Table 2.

The means of measured FFT coefficients used in calculating power required to move

CoefficientControlH1H2H3V1V2V3L1L2
FreqH0.80 1.00 1.99 3.04 0.46 1.44 1.00 0.74 0.90 
AmpH0.16 0.97 1.30 0.55 0.19 0.25 0.19 0.22 0.57 
FreqH1.50 1.21 0.53 0.36 1.24 0.95 1.00 1.18 0.80 
AmpH0.14 0.19 0.27 0.36 0.14 0.21 0.16 0.18 0.35 
FreqH1.99 1.18 0.83 0.64 0.88 0.70 1.62 0.86 1.37 
AmpH0.12 0.14 0.18 0.15 0.12 0.19 0.14 0.39 0.31 
FreqV0.42 0.78 1.18 0.70 1.02 1.99 3.03 0.86 0.80 
AmpV0.19 0.18 0.17 0.18 1.17 1.45 0.47 0.45 0.71 
FreqV1.12 1.35 2.05 1.48 1.01 0.41 0.45 0.36 1.53 
AmpV0.16 0.14 0.11 0.09 0.19 0.29 0.29 0.21 0.44 
FreqV1.74 1.30 1.79 1.72 2.07 1.46 0.59 1.41 1.20 
AmpV0.12 0.10 0.09 0.08 0.18 0.20 0.24 0.16 0.33 
FreqL1.23 0.67 1.63 1.18 0.59 0.89 0.73 1.01 1.99 
AmpL0.23 0.33 0.44 0.38 0.35 0.39 0.42 1.11 1.69 
FreqL1.30 0.96 1.47 2.27 0.90 1.14 0.73 0.42 0.20 
AmpL0.19 0.21 0.17 0.29 0.27 0.33 0.31 0.22 0.85 
FreqL2.30 1.43 2.57 1.25 1.73 1.21 0.87 0.71 0.81 
FreqL0.15 0.16 0.11 0.21 0.18 0.27 0.27 0.17 0.65 
CoefficientControlH1H2H3V1V2V3L1L2
FreqH0.80 1.00 1.99 3.04 0.46 1.44 1.00 0.74 0.90 
AmpH0.16 0.97 1.30 0.55 0.19 0.25 0.19 0.22 0.57 
FreqH1.50 1.21 0.53 0.36 1.24 0.95 1.00 1.18 0.80 
AmpH0.14 0.19 0.27 0.36 0.14 0.21 0.16 0.18 0.35 
FreqH1.99 1.18 0.83 0.64 0.88 0.70 1.62 0.86 1.37 
AmpH0.12 0.14 0.18 0.15 0.12 0.19 0.14 0.39 0.31 
FreqV0.42 0.78 1.18 0.70 1.02 1.99 3.03 0.86 0.80 
AmpV0.19 0.18 0.17 0.18 1.17 1.45 0.47 0.45 0.71 
FreqV1.12 1.35 2.05 1.48 1.01 0.41 0.45 0.36 1.53 
AmpV0.16 0.14 0.11 0.09 0.19 0.29 0.29 0.21 0.44 
FreqV1.74 1.30 1.79 1.72 2.07 1.46 0.59 1.41 1.20 
AmpV0.12 0.10 0.09 0.08 0.18 0.20 0.24 0.16 0.33 
FreqL1.23 0.67 1.63 1.18 0.59 0.89 0.73 1.01 1.99 
AmpL0.23 0.33 0.44 0.38 0.35 0.39 0.42 1.11 1.69 
FreqL1.30 0.96 1.47 2.27 0.90 1.14 0.73 0.42 0.20 
AmpL0.19 0.21 0.17 0.29 0.27 0.33 0.31 0.22 0.85 
FreqL2.30 1.43 2.57 1.25 1.73 1.21 0.87 0.71 0.81 
FreqL0.15 0.16 0.11 0.21 0.18 0.27 0.27 0.17 0.65 

For each feeding bout, the moth's path was subjected to an FFT analysis. The top three amplitude (Amp) peaks for each axis of motion (H, V and L) were used, along with their corresponding frequencies (Freq). The columns show the different frequency and direction treatments, while the rows are the mean FFT coefficients.

Close Modal

or Create an Account

Close Modal
Close Modal