Homeostatic replacement of epithelial cells from basal precursors is a multistep process involving progenitor cell specification, radial intercalation and, finally, apical surface emergence. Recent data demonstrate that actin-based pushing under the control of the formin protein Fmn1 drives apical emergence in nascent multiciliated epithelial cells (MCCs), but little else is known about this actin network or the control of Fmn1. Here, we explore the role of the small GTPase RhoA in MCC apical emergence. Disruption of RhoA function reduced the rate of apical surface expansion and decreased the final size of the apical domain. Analysis of cell shapes suggests that RhoA alters the balance of forces exerted on the MCC apical surface. Finally, quantitative time-lapse imaging and fluorescence recovery after photobleaching studies argue that RhoA works in concert with Fmn1 to control assembly of the specialized apical actin network in MCCs. These data provide new molecular insights into epithelial apical surface assembly and could also shed light on mechanisms of apical lumen formation.
Epithelia, as dynamic scaffolds and as the first line of defence against toxins and pathogens, are crucial components of all metazoan animals. These cell sheets are characterized both by their barrier function and also by their strong polarization, with a basal surface generally abutting an extracellular matrix and an apical surface facing either a fluid-filled lumen or the exterior of the animal. To maintain homeostatic cell number and organization, epithelial cells undergo turnover – routine addition of new cells and removal of old cells (Macara et al., 2014; Pellettieri and Sanchez Alvarado, 2007).
Epithelial cell turnover poses unique challenges, and simply maintaining a fluid-tight barrier during cell division requires a tight choreography between cells (for example, see Higashi et al., 2016). More complex epithelia face even greater difficulties. For example, the mammalian airway epithelium is maintained through regular addition of new multiciliated cells (MCCs) from a distinct basally positioned population of stem cells, such that nascent cells must first define an apical–basal axis, move apically, insert into the epithelium, and finally assemble an apical cell surface (Fig. 1A) (Rock et al., 2009, 2010; Watson et al., 2015). Although the establishment of apicobasal polarity and the assembly of apical cell surfaces during lumen formation have been extensively studied (Datta et al., 2011; Rodriguez-Boulan and Macara, 2014), the mechanisms by which individual nascent cells insert into an epithelium and by which a new apical cell surface emerges remain poorly characterized.
Recently, the nascent MCCs in developing Xenopus embryos have emerged as a model for studies of mucociliary epithelia (Werner and Mitchell, 2011). These epithelial cells, which display dozens or hundreds of synchronously beating cilia that generate fluid flow across epithelium, are born from a population of basal progenitor cells (Drysdale and Elinson, 1992). They subsequently intercalate radially into the superficial epithelium, where they integrate with the pre-existing epithelial cells and expand their apical surface (Fig. 1A) (Stubbs et al., 2006). An outline of the molecular framework for the control of radial intercalation of MCCs is now emerging, revealing key roles for dystroglycan, Rab11, the Par complex, Slit2 and the Rfx2 transcription factor (Chung et al., 2014; Kim et al., 2012; Sirour et al., 2011; Werner et al., 2014). In addition, we have recently explored the mechanical basis specifically of apical surface emergence in nascent MCCs, finding that the forces that drive apical emergence are cell-autonomous and dependent on the assembly of an apical actin network generating effective two-dimensional (2D) pushing forces (Sedzinski et al., 2016).
MCCs are known to develop complex apical actin structures that are not shared with the neighboring mucus-secreting cells into which they emerge, an attribute observed not only in Xenopus (Park et al., 2006; Sedzinski et al., 2016; Turk et al., 2015; Werner et al., 2011) but also in MCCs of the mouse airway and avian oviduct (Chailley et al., 1989; Pan et al., 2007). This actin network is crucial not only for apical emergence in nascent cells (Sedzinski et al., 2016) but also for basal body docking (Park et al., 2008) and basal body planar polarization (Turk et al., 2015; Werner et al., 2011). The molecular mechanisms controlling assembly of this multi-functional actin network remain poorly defined.
For example, the small GTPase RhoA is required for basal body docking and planar polarization (Pan et al., 2007; Park et al., 2006), but its role in MCC apical emergence is unknown. Moreover, the known RhoA effector Formin 1 (Fmn1) is required for apical emergence (Sedzinski et al., 2016), but little else is known about Fmn1 regulation or its mode of action. Here, we combine transgenic reporters, in vivo time-lapse imaging and fluorescence recovery after photobleaching (FRAP) to demonstrate that RhoA activity is required in nascent MCCs for normal apical emergence, acting together with Fmn1 to control the dynamics of the MCC apical actin network. These results shed new light on the process of apical emergence specifically and are also of more general interest because of the broad roles for formin proteins in apical surface remodeling during lumen formation (Grikscheit and Grosse, 2016).
RhoA controls the dynamics of MCC apical emergence
Formin proteins contribute to various cellular actin-based cytoskeletal structures through their ability to polymerize linear actin filaments and are commonly recognized as key effectors of Rho GTPases (Goode and Eck, 2007; Hall, 2012). Given the requirement for Fmn1 in apical emergence (Sedzinski et al., 2016), we probed the role of RhoA in this process. We first measured the dynamics of RhoA activity using the active RhoA biosensor (rGBD), which has been shown previously to be effective in Xenopus (for examples, see Benink and Bement, 2005; Breznau et al., 2015; Reyes et al., 2014). We expressed GFP–rGBD in the mucociliary epithelium and found that throughout the expansion phase of the MCC apical surface, the fluorescence intensity of normalized active RhoA increased (Fig. 1B–E), a pattern that is highly reminiscent of that observed for apical actin, a key driver of apical emergence (Fig. 1C,D).
To further explore the role of RhoA in MCC apical emergence, we expressed dominant negative (DN-) and constitutively active RhoA (CA-RhoA), specifically in Xenopus MCCs using the α-tubulin (Tuba4b) promoter (Stubbs et al., 2006). This approach allowed us to assess the effect of two opposite regimes, either higher or lower RhoA activity, in a cell-autonomous manner in emerging MCCs. We observed that expression of DN-RhoA slowed the rate of apical surface area expansion and decreased the final size of the MCC apical domain, whereas expression of CA-RhoA had no significant effect (Fig. 2; Fig. S1). In addition, DN-RhoA-expressing cells also exhibited non-periodic iterative pulses of expansion and constriction of the apical surface (Fig. 2C,D; Table S1, Movie 1). These pulses were similar to those observed after disruption of Fmn1 function; importantly, however, expression of DN-RhoA rarely elicited the complete collapse of the apical cell surface that is associated with formin loss in these cells (Table S1) (Sedzinski et al., 2016). This difference might result from the efficacy of the reagents [DN-RhoA versus a morpholino against Fmn1 (Fmn1-MO)] in decreasing the actin-based pushing forces, or it could relate to the specific functions of the two proteins in controlling force balance at the MCC apical surface, as we discuss below.
Formins are known to act as RhoA effectors in diverse settings, so we next examined the localization and dynamics of Fmn1 after DN-RhoA expression. We found that in controls fluorescently tagged Fmn1 was evenly distributed throughout the apical domain (Fig. S2A,E,I), whereas cells expressing DN-RhoA accumulated Fmn1 predominantly within the central portion of the apical cell surface (Fig. S2C,G,J). Similarly, expression of DN-RhoA resulted in a higher concentration of actin within the central region of the apical domain (Fig. S2C,G,J) compared to the uniform actin signal in controls (Fig. S2B,F,I). We then measured the dynamics of Fmn1 and actin, and observed that expression of DN-RhoA impaired both stereotypical patterns (Fig. S2K,L). Taken together, these data suggest that RhoA works upstream of Fmn1 and is required in a cell-autonomous manner for normal apical emergence in MCCs.
RhoA controls force balance in the apical surface during MCC emergence
We next sought to understand how manipulation of RhoA in MCCs impacted upon the mechanical forces that drive apical emergence. MCC apical emergence in Xenopus is the product of the force balance exerted on an apical cell membrane by cell-autonomous and cell-non-autonomous forces (Fig. 3A). Emergence is facilitated by (i) actin-based pushing forces (2D pressure) generated by actin network assembly within the medial portion of the MCC apical domain (Fig. 3A, orange arrows, δP) and (ii) pulling forces, generated by actomyosin cortical tension of the perpendicular junctions along neighboring cells (Fig. 3A, blue arrows, Λ). Conversely, emergence is resisted by (i) actomyosin-based cortical tension within the MCC that acts to shrink the apical domain (Fig. 3A, black arrows, γ) and (ii) resistance of the neighboring cells (Fig. 3A, red arrows, E) (Sedzinski et al., 2016).
The respective contributions of these forces can be assessed by analyzing the shape and dynamic behavior of the apical cell perimeter. When considering cell autonomous forces within the MCCs, apical surface perimeters are rounded when pushing forces dominate but are polygonal when pulling forces are in excess. Moreover, apical perimeters collapse when MCC cortical tension (γ) exceeds the pushing forces (δP). For example, such collapses are consistently observed after disruption of Fmn1 by knockdown, expression of a dominant-negative construct or pharmacological inhibition (Sedzinski et al., 2016). Generically, the curvature of an MCC cell edge is determined by the ratio of the pressure difference between the MCC and the neighboring cell sharing this edge, and by the MCC cortical tension, a relationship known as the Laplace law. To interrogate the balance of forces in MCCs after manipulation of RhoA function, we quantified apical surface shapes by segmenting the apical perimeter and calculating the kurtosis of its curvature; kurtosis here is thus an angularity parameter, which equals zero if the domain is perfectly round and increases for more polygonal shapes (Movie 1; see Materials and Methods).
Normally, the apical surfaces of MCCs are rounded (low kurtosis) during early emergence, indicating that pushing forces dominate at these stages (Figs 2A and 3B, black) (Sedzinski et al., 2016). By contrast, apical domain shapes of MCCs expressing DN-RhoA were more polygonal, with elongated cell–cell boundaries meeting at sharp junctional angles (Figs 2C, 3B, pink). This effect was particularly pronounced at during early stages of emergence (i.e. small apical domains). This polygonal cell shape suggests that the predominant effect of DN-RhoA in MCCs is a reduction of the pushing force (δP), leading to defective apical emergence.
To further test the impact of expression of DN-RhoA, we performed shape simulations testing the possibilities that RhoA acts only on apical actin assembly (pressure) or both on apical actin assembly and MCC cortical tension. We assume that a decrease in pressure causes a decrease in MCC area and that a decrease in MCC cortical tension has the opposite effect. Because we observed a significantly lower final area for MCCs that expressed DN-RhoA, we conclude that the reduction of pressure must outweigh the decrease of cortical tension. However, decreasing both pressure and MCC tension cooperate in increasing the angularity of the MCC, and our simulations suggest that DN-RhoA-expressing cells also slightly downregulate MCC cortical tension to account for their angularity increase (Fig. 3C).
Interestingly, we also observed that expression of CA-RhoA in vivo did not significantly change the kurtosis parameter compared to that of controls of similar areas (Figs 2B, 3B, green), with the exception of small apical areas, for which CA-RhoA-expressing cells were more round. Moreover, CA-RhoA-expressing MCCs did not display a significantly larger final apical area. A plausible explanation for this phenomenon would be that RhoA is already fully activated in control cells. Another hypothesis would be that CA-RhoA slightly increases both the MCC apical pushing force (δP) and also the MCC cortical tension (γ), resulting in a slightly rounded cell shape, with the influence of each on rate and final area of apical emergence cancelling each other, a scenario predicted by the shape simulations (Fig. 3C). Taken together, these data suggest that RhoA regulates both 2D pressure and cortical tension in MCCs, and that the dynamics of apical emergence are the net product of these forces.
RhoA controls the rate of MCC apical actin network assembly
MCC emergence is characterized by a strong positive correlation between apical area and apical actin concentration, suggesting that the apical actin network assembly drives emergence (Sedzinski et al., 2016). We therefore assessed the effect of RhoA manipulation on actin network assembly in MCCs by measuring apical actin concentration over time (Fig. 4A–C; Movie 1) (see Materials and Methods). In controls, we observed a consistent increase in apical actin intensity across the period of emergence (Fig. 4C, black), as reported previously. Likewise, we observed no change in actin assembly after expression of CA-RhoA (Fig. 4C, green). In striking contrast, expression of DN-RhoA significant abrogated apical actin assembly (Fig. 4C, pink). As a result, the clear positive linear correlation between apical surface area and normalized actin intensity that we observed in normal cells was dramatically reduced in in MCCs that expressed DN-RhoA (Fig. 4D). These data suggest that RhoA is an essential positive regulator of apical actin assembly during MCC emergence, and that in the absence of RhoA function, failure of actin assembly (Fig. 4) results in a reduced pressure δP (Fig. 3), which in turn disturbs apical emergence (Fig. 2).
RhoA and Fmn1 control actin turnover rate in the MCC apical actin network
The apical actin network of MCCs is highly specialized (Park et al., 2006; Sedzinski et al., 2016; Turk et al., 2015; Werner et al., 2011). However, unlike well-studied actin networks such as lamellipodia, we know almost nothing about the molecular control of MCC apical actin assembly. We therefore sought to characterize the dynamics of this actin population, which can be done by quantifying the turnover of apical actin in MCCs using fluorescence recovery after photobleaching (FRAP) of YFP–actin (Fritzsche et al., 2013; Grikscheit et al., 2015; Phng et al., 2015; Sahasrabudhe et al., 2016). We photobleached a small region of interest within a medial portion of MCC apical domains and monitored subsequent recovery of YFP–actin fluorescence (Fig. 5A,B). Compared to the well-characterized actin networks of lamellipodia or of the cell cortex (Lai et al., 2008; Watanabe, 2010), fluorescence recovery of the MCC apical actin network was much slower, suggesting that the MCC apical actin network is very stable.
Strikingly, cells that expressed DN-RhoA displayed an initial slope of fluorescence actin recovery that was steeper than that of controls, and accordingly, the half-time of fluorescence recovery was shorter (Fig. 5C,D). These data argue that in the specialized apical actin network of MCCs, inhibition of RhoA results in increased actin turnover. Formins are well known effectors of RhoA activity (Goode and Eck, 2007; Hall, 2012), so in light of the requirement for both RhoA and Fmn1 in apical emergence, we examined the effect of Fmn1 knockdown on apical actin dynamics by FRAP. Fmn1 knockdown also significantly accelerated the half-time of recovery of YFP–actin after photobleaching (Fig. 5C,D). Interestingly, we observed no difference between the recovery curves of CA-RhoA and of controls (Fig. 5C,D). In all conditions, the immobile fraction was small and did not differ significantly between conditions (Fig. 5D).
Recently, several studies have suggested that actin turnover rates are impacted by a finite balance of actin filament subpopulations, with distinct turnover kinetics regulated by ARP2 and ARP3 (Arp2/3) and formins. In this scheme, inhibition of formins or Arp2/3 shifts the turnover rate towards the Arp2/3- or formin-based kinetics, respectively (Burke et al., 2014; Fritzsche et al., 2013; Lomakin et al., 2015; Rotty et al., 2015; Suarez et al., 2015). To determine if such a balance was also at work in MCCs in vivo, we performed FRAP on apical actin after treatment with a specific Arp2/3 inhibitor, CK666. In contrast to the effects of Fmn1 or RhoA disruption, we observed that inhibition of Arp2/3 decreased the half time of actin turnover and also reduced the mobile fraction (Fig. 5C–E). This result could be explained by the fact that formin-nucleated filaments are, on average, ten times longer than Arp2/3-nucleated filaments, thus their turnover is slower (Fritzsche et al., 2016). Consequently, inhibition of Arp2/3 shifts the actin kinetics toward a slower turnover rate, whereas knockdown of Fmn1 facilitates nucleation of shorter actin filaments turning over more quickly. Indeed, loss of Fmn2 has been associated with the presence of shorter actin filaments, which turnover more quickly (Yang et al., 2007).
Here, we have examined the function of RhoA and the dynamics of the apical actin network during apical emergence in nascent MCCs. These data build on our previous work that has shown that the force balance between a pushing apical actin network and actomyosin cortex contractility determines the dynamics of MCC emergence (Sedzinski et al., 2016). Our data suggest that RhoA acts in concert with Fmn1 and that Fmn1 acts in balance with Arp2/3 to control assembly of the MCC apical actin network.
We found that depletion of Fmn1 specifically in MCCs leads to apical domain collapse as a consequence of high cortical tension and low actin-based pushing forces (Fig. 6A, blue) (Sedzinski et al., 2016), so it is relevant that RhoA regulates both contractile processes through activation of myosin motors through Rho kinases and also actin polymerization through formins (Goode and Eck, 2007; Hall, 2012). Here, our imaging of the dynamics of apical emergence (Fig. 2), analysis of cell shapes (Fig. 3) and dynamics of apical actin (Figs 4 and 5) indicate that expression of DN-RhoA decreases formin-mediated actin network assembly, which leads to a slower expansion rate and polygonal shape of the apical domain (Fig. 6B, pink). The fluctuations of apical area without total collapse that are elicited by DN-RhoA is a milder phenotype compared to the effect of Fmn1 disruption, which is probably due to a simultaneous effect of RhoA disruption on both cortical contractility – the driving force of collapse – and actin-based pushing (Fig. 6B, pink). Interestingly, expression of CA-RhoA had no general impact on the process of apical emergence; perhaps suggesting that in control cells RhoA is maintained at a fully activated state (Fig. 6A, green). In the future, it will be important to further decipher Fmn1 regulation, particularly to identify molecular switches that direct RhoA toward activation of actin polymerization in the apical surface and activation of myosin motors at the cortex.
The results of our analysis of actin turnover are also of interest because we find that Fmn1 loss leads to acceleration of actin turnover, and disruption of another formin, Fmnl2, has been shown to have a similar effect on cortical actin in epithelial cells (Grikscheit et al., 2015). However, our results contrast with recent data that show that inhibition of formins increases the half time of actin turnover in other cell types, including M2 melanoma cells, neurons, vascular cells and fibroblasts (Fritzsche et al., 2013; Ganguly et al., 2015; Phng et al., 2015; Sahasrabudhe et al., 2016). Clearly, however, the functions of formin proteins differ between cell types and actin populations, because loss of formins decreased the mobile actin fractions in fibroblasts and neurons (Ganguly et al., 2015; Sahasrabudhe et al., 2016) yet left the mobile fraction unchanged in vascular cells (Phng et al., 2015), similar to the case here for MCCs. Moreover, in systems in which an actin network forms de novo, such as in the cortex of retracting blebs, actin turnover is almost tenfold higher compared with that in the mature cortex, suggesting that the molecular mechanisms regulating actin turnover in new cortices are different compared to those in mature networks (Bovellan et al., 2014). It is important to note, therefore, that the FRAP analyses reported here were performed on mature apical MCC surfaces. The dynamics of apical actin during the active expansion of the apical MCC surface could be different and should be explored. Nevertheless, the findings here also suggest that Fmn1 works in counterbalance with Arp2/3 to control the MCC apical actin network, as has been observed in other cell types (Burke et al., 2014; Rotty et al., 2015; Suarez et al., 2015). Thus, our data argue that the MCC apical actin network, like other well-defined actin structures, is quite complex. Additional studies will be required to fully understand how this network is regulated to execute its diverse functions, not only during MCC apical emergence but also during ciliogenesis and basal body polarization and positioning (Park et al., 2006; Sedzinski et al., 2016; Turk et al., 2015; Werner et al., 2011).
Finally, our data here highlight the similarities between distinct modes of apical surface remodeling. Studies in diverse vertebrate cell types in vitro and in vivo demonstrate a key role for formins in coordinating apical surface formation among groups of cells during epithelial lumen formation (Grikscheit et al., 2015; Madrid et al., 2010; Phng et al., 2015; Taniguchi et al., 2015). Likewise, our data here and in previous work (Sedzinski et al., 2016) demonstrate a similar requirement for formins in the emergence of an individual apical epithelial surface in MCCs. Interestingly, the coordinated assembly of multiple apical surfaces during lumen formation also requires Rab11, the Par complex and Slit–Robo signaling (Bryant et al., 2010; Medioni et al., 2008; Santiago-Martinez et al., 2008), and the same is true of radial intercalation and apical emergence in individual MCCs (Chung et al., 2014; Kim et al., 2012; Werner et al., 2014). Further exploration of these issues will provide new insights into the mechanisms of organogenesis and epithelial homeostasis.
MATERIALS AND METHODS
Xenopus embryo manipulations
Experiments were performed following the animal ethics guidelines of the University of Texas at Austin, protocol number AUP-2015-00160. Xenopus laevis adult females were induced to ovulate through injection of human chorionic gonadotropin. The following day, eggs were squeezed, fertilized in vitro and dejellied in 3% cysteine (pH 7.9). Fertilized embryos were washed and subsequently reared in a 0.3× Marc's Modified Ringer's (MMR) solution. For microinjections, embryos were placed into a solution of 2% Ficoll in 0.3× MMR and injected using a glass capillary-pulled needle, forceps and an Oxford universal micromanipulator.
Cloning, plasmids, morpholinos and drug treatment
For α-tubulin-driven expression of DN-RhoA or CA-RhoA, the open reading frame (ORF) of human DN-RhoA or CA-RhoA was amplified by performing PCR from plasmids obtained from addgene.org (#15901 and #15900, respectively), enzymatically subcloned into a α-tubulin-driven expression plasmid containing a C-terminal RFP expression tag, and injected into two ventral blastomeres at the four-cell stage at 30 pg per blastomere. We observed no differences in phenotype upon fluorescently tagging the CA-RhoA sequence at the N-terminal end. Apical actin was visualized using α-tubulin-driven GFP–utrophin (GFP–UtrCH) injected at 25 pg per blastomere. Morpholinos against Fmn1 were used as described previously (Sedzinski et al., 2016). Arp 2/3-mediated actin polymerization was inhibited by incubating for 30 min with 50 µM CK666 (Sigma).
Live imaging of apical expansion
Embryos at stages ∼18–20 were mounted in 0.8% (w/v) low-melting-point agarose (LMPA), covered in 0.3× MMR and imaged at 23°C with a Zeiss LSM700 confocal microscope using C-Apochromat 40× 1.2 NA water immersion objective.
Fluorescence recovery after photobleaching
where we defined kp as the polymerization rate, kd as the depolymerization rate, as the turnover rate and as the steady-state actin density.
This predicts a single exponential with characteristic time τ for the recovery curves, which we have verified here experimentally. Moreover, one can see from the equation above that the turnover time is inversely proportional to the depolymerization rate. Therefore, a lower turnover time in Fmn1-MO and α-tubulin-driven DN-RhoA embryos indicates a higher depolymerization rate. In turn, assuming a steady polymerization rate, this leads to a lower actin density ρ0.
Image processing and automated image analysis
Images were processed and automatically analyzed using a custom code in MATLAB (KoreTechs), as previously described (Biro et al., 2013).
Cell contour detection and classification of cellular regions
Segmentation of cells was based on a combination of image filtering, ellipse fitting and adaptive thresholding. Throughout images and movies, as we were looking at a 2D representation of a 3D cell, of which only the apical surface was exposed, this apical surface in reality constitutes a cortical surface. However, within the focused apical plane, the cortex was defined as a region of fixed depth underlying the segmented cell contour. The medial region was taken as the difference between the segmented cell area and the cortical region. The definition of the cell contour, cortical and cytoplasmic regions allowed for the extraction of region-specific morphological parameters and intensity values. The effective apical actin concentration and amount of active RhoA were defined as a ratio of the mean actin:rGBD intensity in the medial region and as the mean intensity of actin:rGBD within cortical region.
Measuring angularity of the apical domain by kurtosis
In order to have a quantitative measurement of the angularity of MCC apical perimeter over time, we segmented the outline of the cell apical perimeter and calculated it in polar coordinates r(\Θ,t), using a 1 degree binning. After smoothing the function r(\Θ,t) with a 5° binning over \Θ, we calculated the local curvature C(\Θ,t), and we then computed the kurtosis k(t) of the distribution C(\Θ,t) – i.e. the normalized fourth moment minus 3 (the reason for subtracting 3 is that it is the kurtosis of a normal distribution, which is expected to arise purely from segmentation noise and errors). We then binned the data for given apical radii and averaged each bin across all cells analyzed. The rationale for using radius instead of time as the x-axis is to correct for the difference in timing of apical emergence between different cells. To statistically compare kurtosis at each radius between mutant and control, we compared each distribution of average kurtosis among different cells by performing Welch's t-test. Our reasoning for using kurtosis as an indicator of angularity is that it measures how heavy the tails are of a distribution. Very angular cells will have mostly low curvature at the edges but very high curvatures at their vertices, resulting in a heavy-tailed distribution, and thus high kurtosis. In contrast, round cells will have a kurtosis close to 0. This makes rescaled kurtosis a more intuitive measurement than the variance of the distribution, for instance.
Statistical analyses were performed using MATLAB software. Unless otherwise specified, Mann–Whitney U-test was used to compare statistical significance. The experiments were not randomized, and no statistical method was used to predetermine sample size. Reproducibility of all results was confirmed by performing independent experiments. All experiments were repeated a minimum of three times. To statistically compare the area versus actin concentration curves in different experiments, we used linear least square regression to obtain estimates for the slope and standard error of the slope in each condition, and tested for statistical differences between the slope of the control versus a given mutant condition.
We thank the Wallingford laboratory members for experimental suggestions and critical reading of the manuscript.
J.S., E.H. and J.B.W. designed the research and wrote the paper; J.S. performed the experiments; M.B. developed the image analysis tools; J.S., E.H. analyzed the data; F.T. contributed to experimental procedures.
This work was funded by a European Molecular Biology Organization (EMBO) Long Term Fellowship to J.S.; a Research Fellowship from Trinity College, University of Cambridge; a Wellcome Trust fellowship (110326/Z/15/Z) and Fondation Bettencourt Schueller Young Researcher Prize to E.H; a Cancer Institute NSW Early Career Researcher fellowship (13/ECF/1-25) and a Cancer Australia and Cure Cancer Australia Foundation project grant (1070498) to M.B.; and grants from the National Heart, Lung, and Blood Institute (HL117164) and National Institute of General Medical Sciences (GM074104) to J.B.W. This work was initiated at the New Quantitative Approaches to Morphogenesis Workshop at University of California, Santa Barbara, which is funded in part by the National Science Foundation (PHY11-25915) and the National Institute of General Medical Sciences (GM067110-05). Deposited in PMC for release after 12 months.
The authors declare no competing or financial interests.